Paint Producer

Zinc Stearate Customers Project Case

Return Visits: Date:2018-09-17 14:41:30

Project time: Year of 2017-2018

Dongjun Material: CS-1 Zinc stearate, CS-2 Zinc stearate

Application coating:

Wooden NC sanding sealer, Wooden PU sanding sealer, Wooden PE sanding sealer

Project location:

Iran, Vietnam, Pakistan,Egypt

Principle in Nitrocellulose wooden coating

1. Add our CS-1 or CS-2 Zinc stearate in proper dosage from 0 - 2%, if over dosage, it will effect the primer adhesion and transparency, and we also need pay attention on the storage stability(anti-settlement), and also NC paint main content is nitrocellulose and alkyd resin, it is a self-dry and fast dry coating, because nitrocellulose is high molecule, low solid content, so wetting performance is bad, so we suggest you adding dosage can not be over.

Principle in Polyurethane wooden coating

2. Add our CS-1 or CS-2 Zinc stearate in proper dosage from 2 - 5%, if over dosage, it will effect the primer adhesion and transparency and turn white performance, and also PU paint need be curied during operation, and this curing agent is in the rate of 1/3.

Principle in PE wooden coating

3. Add our CS-1 or CS-2 Zinc stearate in proper dosage from 2 - 5%, if over dosage, it will effect the primer adhesion and transparency and turn white performance, and also PE paint

Main content is PE resin and styrene, it is a type of cross-linking curing coating, before applying,it

Need add initiator, and then curing under room temperature.

Customers application photos:

Cooperation

TEL

86-757-22900405